CBZQZ - AQUAPON W/B EPOXY MIDTONE TINT BASE 98-56
- MSDS: CBZQZ
- Manufacturer: PPG INDUSTRIES INC
- Product Name: AQUAPON W/B EPOXY MIDTONE TINT BASE 98-56
- National Stock Number: 8010-00N073149
Product Identification
Product ID:AQUAPON W/B EPOXY MIDTONE TINT BASE 98-56
MSDS Date:08/10/1995
FSC:8010
NIIN:00N073149
Kit Part:Y
MSDS Number: CBZQZ
Responsible Party
ALLISON PARK, PA 15101
US
Emergency Phone: 304-843-1300
Info Phone: 412-492-5555
Cage: DO542
Contractor
Telephone: 412-492-5555
Cage: DO542
Ingredients
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 25-30%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
BARIUM SULFATE
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: 10-15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
ETHANOL, 2-BUTOXY-; (ETHYLENE GLYCOL MONOBUTYL ETHER)
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 5-10%
OSHA PEL 50 PPM, S
ACGIH TLV: 25 PPM, S
ETHANOL, 2-PROPOXY-; (ETHYLENE GLYCOL MONOPROPYL ETHER)
CAS: 2807-30-9
RTECS: KM2800000
Fraction By Weight: 2-5%
OSHA PEL N/K
ACGIH TLV: N/K
TOLUENE (SARA 313) (CERCLA)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 2-5%
OSHA PEL 200 PPM
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER; (TAP WATER)
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 25-30%
OSHA PEL N/K
ACGIH TLV: N/K
FILM FORMERS, RESINS, AND ADDITIVES
Fraction By Weight: 15-20%
OSHA PEL N/K
ACGIH TLV: N/K
SINCE OVEREXP ARE NOT EXPECTED, THERE IS NO
RTECS: 9999999ZZ
GLYCOL ETHER &/ACETATE WHICH HAS BEEN SHOWN TO CAUSE
RTECS: 9999999ZZ
EYE
RTECS: 9999999ZZ
THAT SOLV LEVELS ARE TOO HIGH. REDNESS, ITCH,
RTECS: 9999999ZZ
EYE CONT. DRYNESS, ITCH, CRACKING, BURNING,
RTECS: 9999999ZZ
ANIMAL STUDIES CLEARLY DEMONSTRATED DOSE-RELATED
RTECS: 9999999ZZ
KIDNEYS & LIVER, ASSOC W/ADMIN OF ETHYLENE GLYCOL
RTECS: 9999999ZZ
PUBLICATION # 90-118) . TOLUENE APPEARS ON THE NAVY
RTECS: 9999999ZZ
SEEK CONSULT FROM APPROP HLTH PROFESSIONALS
RTECS: 9999999ZZ
ONLY THE SPILLED MATERIAL AND THE ABSORBENT
RTECS: 9999999ZZ
DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST
RTECS: 9999999ZZ
LEL BELOW THE STATED LIMIT, AND TO REMOVE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE: SEV IRRIT. SKIN: MAY CAUSE MOD IRRIT. MAY BE
HARMFUL IF ABSORBED THRU SKIN. PRLNG/RPTD CONT MAY CAUSE ALLERGIC
SKIN RXN. INHAL: VAP & SPRAY MIST HARMFUL IF INHALED. MAY CAUSE
IRRIT &/ALLERGICRESP RXN IN LUNGS. VAP IRRITATES EYES, NOSE, &
THROAT. RPTD (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: EXPOS TO HIGH VAP CONCS MAY CAUSE
IRRIT OF RESP SYS & PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE
BY DELIBERATELY CONC & INHALING CONTENTS MAY BE HARMFUL/FATAL.
CHRONIC: AVOID LONG TERM & RPTD CONT. CONTAINS TITANIUM DIOXIDE.
ANIMALS INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN A
LONG-TERM (SUP DAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. IF
INGEST, ANY TYPE OF OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING
USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD IMMED. HAVE MSDS
INFO AVAILABLE.
Fire Fighting
Flash Point Method:PMCC
Flash Point:94.0F,34.4C
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUP DAT)
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS TO PVNT PRESS BUILD-UP & (SUP DAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.
Accidental Release
Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP, SKIN, & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAND, VERMICULITE/OTHER
NON-COMBUST ABSORB MATL & PLACE IN CLEAN, EMPTY CONTRS FOR DISP.
(ING 17)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IC FLAMM LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM, READ THE MSDS FOR THE OTHER COMPONENT OR COMPONENTS BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS.
Exposure Controls
Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) AIR
PURIFYING/AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUCTIONS & LITERATURE CAREFULLY TO (ING 18)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 19)
Protective Gloves:NITRILE, NEOPRENE, OR LATEX GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH & DELUGE
SHOWER . WEAR PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices:DISCARD CONTAMINATED CLOTHING, SHOES OR GLOVES.
Supplemental Safety and Health
EXTING MEDIA: CLASS IC FLAMM LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. HAZ DECOMP PROD: OXIDES OF NITROGEN. EFTS OF
OVEREXP: S TUDY DEVELOPED LUNG TUMORS. POTENTIAL FOR INHAL OF
TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY LIMITED. (ING 8)
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:16.6
Vapor Density:HVR/AIR
Spec Gravity:1.44
Evaporation Rate & Reference:43 (BUTYL ACETATE=100)
Solubility in Water:36.8%
Appearance and Odor:VISCOUS LIQ, W/ODOR CHARACT OF THE CHEM FAMILY &
ANY SOLVS LISTD IN INGS SECTIO
Percent Volatiles by Volume:58.42
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING MAY PRDCE FUMES INCL: CARBON
MONOXIDE, (SUP DAT)
Disposal
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WA STE MANAGEMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.